Exterior Painting in Asheville, NC

Late spring through early fall is the most reliable window for exterior painting in Asheville, when temperatures are consistently above 50°F and humidity is manageable. Mid-summer can bring high humidity and afternoon storms, so scheduling around the forecast matters as much as picking the right season.

Yes, pressure washing is part of every exterior painting project we do in Asheville. Paint applied over mildew, pollen film, or chalky old paint will not adhere properly, so the wash is not optional — it is where a lasting finish begins.

You can paint over old exterior paint if it is still firmly bonded, but any areas that are peeling, bubbling, or chalking need to be scraped and primed before a new coat goes on. Skipping that step on an Asheville home means the new paint will fail in the same spots, often faster than the original coat did.

Yes, homes built before 1978 may have lead-based paint on exterior surfaces, and federal EPA rules require lead-safe work practices when that paint is disturbed by scraping or sanding. If you are unsure whether your home has lead-based paint, a certified lead inspector can test surfaces before work begins.

For a full exterior repaint in Asheville — siding, trim, fascia, and prep — a contractor focused on painting will give you a more thorough process than a general repair visit. Red Stag Contracting handles exterior painting as a dedicated scope, not a side task tacked onto another job.

A complete exterior painting project covers pressure washing, scraping loose paint, priming bare spots, caulking gaps, and applying finish coats to siding, trim, and fascia. The exact scope depends on your home's size, siding material, and the condition of the existing paint.